Cisco Sfp Removal Tool. LC Connector Remove Tool Here are the steps to remove SFP modules from a Cisco switch: Step 1: Identify the module to be removed: First, identify the module you want to remove from the switch (See Figure 5-1.) Figure 5-1 Bale Clasp SFP Module Removing a Bale Clasp SFP Module To remove this type of SFP module, follow these steps: Step 1 Attach an ESD-preventive wrist strap or ankle strap by following the instructions provided.
CISCO X210BGSR 10220503 21CFR1040.10 SFP TRANSCEIVER MODULE PICKUP from www.ebay.com
Gently wiggle the SFP: Wiggle the module horizontally while pulling it outward Be careful though as its stuck for a reason try not to use.
Does anyone have a link or maybe a newer tool they prefer? Remove the fiber cable connected to the SFP or SFP+ module (if present) Cisco SFP Removal Tool Has anyone seen these before? I've got 2 and haven't been able to find them anywhere
Cisco SFP10GERS Compatible 10GBaseER SFP+ Transceiver (SMF, 1550nm. Remove the fiber cable connected to the SFP or SFP+ module (if present) Use a flathead screwdriver for leverage: If wiggling isn't enough, carefully insert a small flathead screwdriver between the SFP and the.
Cisco® SFPH10GBCU15M Compatible 10GBaseCU SFP+ to SFP+ Passive. Look for the label on the switch that indicates which module is in which slot For those that need to know the technique is get underneath the SFP and depress the clip that is part of sfp port